MIMAKI UJV-160 - Page 73

If dots misalign
3-3
3
Useful Function
9
Correct the dot position of the selected
mode with the key.
• Correction value ： -400 to 400
• Check the test pattern. A correction value is at the position where an outward way and a
return way are on one line.
• If the correction value is not between -400 and 400, adjust the height of head then redo the
operations from the step 2.
10
Press the key.
11
Press the key to finish.
DROP . POS c o r r e c t
600dp i NORMAL / 4 : 0
ENTER
END