MIMAKI UJV-160 - CHAPTER 4 How to care

In this chapter, maintenance of this machine such as ink
replacemnet or cleaning are explained.
Maintaining............................................ 4-2
When this machine is left unused for a long
time ...........................................................4-2
Precautions in cleaning ............................4-2
Cleaning exterior surfaces ........................ 4-3
Cleaning the platen ..................................4-3
Cleaning the paper width sensor ..............4-4
Ink cartridge.......................................... 4-5
Replacing with a new ink cartridge ........... 4-5
Ink cartridge trouble ..................................4-7
Cleaning the flushing tray ................... 4-8
Avoiding ink dripping at printing ...... 4-10
When the waste ink tray is full .......... 4-12
Disposing of the ink in the waste ink tray 4-12
Disposing of the waste ink in the
wiper tank ...............................................4-14
Setting nozzle face cleaning time ..... 4-16
Perform cleaning automatically when
the power supply is turned on .......... 4-17
Setting the Maintenance Performed
while the Power Is Turned off............ 4-18
Setting the refresh operation while the
power is turned off ..................................4-18
Setting the cleaning operation while the
power is turned off ..................................4-19
Regular maintenance of white ink .... 4-20
If blur or missing remains.................. 4-23
Subtank Maintenance .............................4-23
Head Wiping........................................ 4-24
Wiper cleaning .................................... 4-25
Refill antifreeze liquid ........................ 4-27
Refilling antifreeze liquid .........................4-28
Replacing of UV LED filter ................. 4-29
CHAPTER 4
How to care