Mindray Accutorr 7 Service Manual

6-14
6.4.2 Removing the 2.4G Wi-Fi Module (Optional, Only Available for
Accutorr 7)
1. Remove the two antennas on the front panel from the slots as shown below:
2. Remove the antennas from the Wi-Fi module PCBA.
3. Push the clamps aside to remove the Wi-Fi module.
Clamps
Antenna
Antenna

Mindray Accutorr 7 Specifications

General

Brand	Mindray
Model	Accutorr 7
Category	Medical Equipment
Language	English