Mindray TEX20 Operator's Manual

4 - 38 Operator’s Manual
4 Setup
MedTouch Preset
You can set environment for MedTouch here and then use the MedTouch function by mobile phone
or tablet computers. See MedTouch manual for details.
4.6.5 Wireless Network Connection
Wireless App Select
Select to enable WPS, X-Link, WLAN, Hotspot.
WPS
When enable WPS in Wireless App Select, wireless probe (i3P/i3PA) can be set.
Hotspot
When enable Hotspot in Wireless App Select, hotspot can be set.
4.6.6 Route Settings
The system can be set to connect to the local network and internet network through route settings at
the same time. For details, please contact the service engineers.
4.6.7 X-Link
Before presetting X-Link, you should enable X-Link in Wireless App Select page.
Item Description
SSID The SSID of wireless probe.
Password The password to connect wireless probe.
Select Network Tap to open Wireless Probe Select page and set wireless probe.
Item Description
SSID The SSID of hotspot.
Password The password to connect hotspot equipment.
Type Item Description
X-Link / Select to enable X-Link function.
Network type WLAN Connect X-Link by WLAN. Tap [Select Network]
to set X-Link SSID or select [Other Network] to
input Network SSID.
Bedside Hotspot Tap to input password to connect X-Link by
bedside hotspot.
LAN Connect X-Link by LAN.
Department Filter / Tap to input filter of department.
Multicast Address / Tap to set multicast address of the network.

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English