To Next Page

To Previous Page

7 - 2 Operator’s Manual

7 Strain Elastography

Tap [H 1:1], [V 1:1], [Full] on the touch screen to adjust.

The system provides 3 types of display format:

• H 1:1: Right and left display (the real-time ultrasound image appears on the left, and the elasto

image appears on the right);

• V 1:1: Up down display (the elasto image appears above, and the real-time ultrasound image

appears below).

• Full: The elasto image only displayed.

Map

Select different maps for observation.

Strain mode

Affect the display effect of adjusting dynamic range.

Dynamic Range

Adjust contrast resolution of an image.

The real-time dynamic range value is displayed on the image parameter area in the upper left corner

of the screen.

E Sensitivity

Increase the image palpability.

Strain Scale

Adjust the bar height of the pressure hint curve to keep the average height of the hint bar on proper

position.

Map Position

Adjust the up/down position of the map.

7.3 Mass Measurement

Tap [Measure] to enter measurement status.

You can measure shell thick, strain ratio, strain-hist, etc.

For details, see Advanced Volume.

Mindray TEX20 Operator's Manual

Other manuals for Mindray TEX20