DICOM 11-7
DICOM print setting items are described as follows:
Name Description
Device
After you set the server (s) in DICOM Server Setting, the
name (s) will appear in the drop-down list, select the name
of the print server.
Default is xxx-Print, and it can be modified.
AE Title
Application Entity title. Here, it should be consistent with that
of the print server.
Port
DICOM communication port, 104 by default. Here, the port
should be consistent with that of the print server port.
Advanced Preset
Maximum Retries: Range: 0-9.
Interval Time(s): Reserved feature.
Timeout: Refers to time after which the system will stop
trying to establish a connection to the service. Value: 5－
60s, in increments of 5s, and 15 by default.
Copies
Refer to copies of printed files. You can select among 1
through 5, or directly enter the number.
Settings
The system supports RGB(color printing) and
MONOCHROME2 (black and white printing). Please select
the type the printer supports.
Film Orientation
Select between LANDSCAPE and PORTRAIT.
Specify printing task priority among HIGH, MED and LOW.
Film Size
Select film size among the selections listed in the drop-down
list.
To Next Page
Loading...
