Appendix A: Specifications
76
Model QAA-5230-70/25 Amplifier with two 70V or 25V, 30 Watt Zones
• 70.7Vrms or 25V constant voltage output
• Two fully supervised Class "A" or "B" speaker zones
• 30 watts per Zone
• Freq. response +/-3dB from 400 to 4000 Hz
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption: standby: 55mA
alarm: 350mA, plus 65mA/watt speaker power
Model QAA-5230S-70/25 Amplifier with 2 split 70V or 25V, 30 Watt Zones
• 70.7Vrms or 25V constant voltage output
• Four fully supervised Class "B" speaker zones, each pair split from one 30 watt amplifier
• 30 watts per zone
• Freq. response +/-3dB from 400 to 4000 Hz
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption: standby: 55mA
alarm: 350mA, plus 65mA/watt speaker power
Model QAA-5230S-525-70/25 Amplifier with 2 split 70V or 25V, 5 and 25 Watt Zones
• 70.7Vrms or 25V constant voltage output
• Two fully supervised Class"B" speaker zones, each pair split from one 30 watt amplifier
• 5 and 25 watts per zone
• Freq. response +/-3dB from 400 to 4000 Hz
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption: standby: 55mA
alarm: 350mA, plus 65mA/watt speaker power
Model QAA-5415-70 Amplifier with four 70V, 15 Watt Zones
• 70.7Vrms constant voltage output
• Four fully supervised Class"B" speaker zones
• 15 watts per zone
• Freq. response +/-3dB from 400 to 4000 Hz
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption: standby: 55mA
alarm: 350mA, plus 75mA/watt speaker power
Model QAA-5415-25 Amplifier with four 25V, 15 Watt Zones
• 25Vrms constant voltage output
• Four fully supervised Class"B" speaker zones
• 15 watts per zone
• Freq. response +/-3dB from 400 to 4000 Hz
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption: standby: 55mA
alarm: 350mA, plus 75mA/watt speaker power
Model QMP-5100B Paging Microphone
• Mounts in Mircom BB-1000 enclosures
• Full set of indicators & controls
• Sturdy fist-microphone
To Next Page
Loading...
Need help?
General
