Mircom QX-5000 Series

To Next Page

To Previous Page

QX-5000 Series Installation and Operation Manual

Model QMP-5101B Paging Microphone

• Mounts in Mircom BB-5008, BB-5014 enclosures

• Full set of indicators & controls

• Sturdy fist-microphone

Model QZP-5101 Paging Selector Panel

• Mounts in Mircom BB-1000 enclosures

• Connects to QMP-5100B or QMP-5101B to provide 24 zones of paging control

• Up to six per QMP-5100B or QMP-5101B

Model QZP-5102/5103 Paging Selector Panel

• Mounts in Mircom BB-1000 enclosures

• Connects to QMP-5100B or QMP-5101B to provide 12 zones of paging control, or 12 zones of page/evac

control

• Up to six per QMP-5100B or QMP-5101B

Model QMT-5300A Master Telephone

• Mounts in Mircom RA-1000 enclosures

• May be used independently with a fire alarm control panel, or by connection to a QMP-5100B or QMP-5101B

• May be used alone to provide a single fire fighters' telephone zone, or with up to six of QZT-5302

Model QMT-5302 Master Telephone

• Mounts in Mircom BB-5008, BB-5014 enclosures

• May be used independently with a fire alarm control panel, or by connection to a QMP-5100B or QMP-5101B

• May be used alone to provide a single fire fighters' telephone zone, or with up to six of QZT-5302

Model QZT-5302 Telephone Selector Panel

• Mounts in Mircom BB-1000 enclosures

• Connects to QMT-5300A/QMT-5302 to provide 12 Fire Fighters' Telephone Zones

• Up to six selector panels per QMT-5300A/QMT-5302

• Unlimited handsets allowed per telephone circuit, supports up to five handsets active at the same time

Model QRM-1001 Bell Cut Relay

• Mounts in QBB-5001 enclosure

• Connects to QIF-5000B via included cable

• Contacts rated 28 Vdc, 1A Resistive Load

• Turns off fire alarm bells during paging

Mircom QX-5000 Series - Page 83