Mitel 3000
Installation & Maintenance Manual
130
Remote Notification, 79
Remote Notification - Personal Number, 79
Remote Notification to a Pager, 79
Reset, 39
System, 81
reset switch, 36
Residential Installation, 35
Restrict Outgoing Calls, 85
Restricted Call Logging, 75
Reversal on Answer, 106
Reversal on Idle, 104
Reverse cadence, 91
Ringback Time Duration, 76
Ringing frequency, 91
Ringing tones, 59
Safety, 6
Safety and precautions, 6
Safety Regulations, 4
Service Types, 110
Spare fuse, 52
Speaker Phone Options, 60
Start Types, 111
Strip National 1, 43
Structured Wiring, 35
Swapping Extensions, 89
Switch on, 55
System language, 71
System Programming, 60, 61, 71
System Settings Options, 62
System VM Box Delay, 76
T1, 36
T1 (RBS) Channel programming, 109
, 109
T1 (RBS) States, 46
T1 (RBS), T1 PRI (ISDN) or E1 PRI (ISDN), 107
T1/E1 Module on the Mitel 3000, 40
T1 DTMF/Pulse Dialing, 112
T1 Error Reports, 45
T1 Line Types, 110
T1 module, 12
T1 PRI (ISDN) Programming, 42
T1 Service Types, 110
T1 span - number of channels, 41
T1 Status, 45
T1(RBS) Framing and Coding, 41
T1/ PRI Diagnostics, 45
T1/E1 PRI Module, 22
Technical specification, 126
Telesecretary Service, 91
TI (RBS) Settings, 40
Time and Date, 71
Timers, 75
Tone Dialing, 104
Tone on Hold, 73
Transit Network, 44
Troubleshooting, 117
Trunk Type, 108
Voice Mailbox % Used, 87
Voice Mailbox Capacity, 82
Voice module, 48
Voice module 2 or 4 port, 12
Voicemail card, 21
wall bracket, 13, 14
Weekend Service, 73
Wink., 111
Wiring Jacks, 33
Xon Xoff, 75
Yellow alarm, 45