Mitel 3000
Installation & Maintenance Manual
57
Call restriction
Extensions are entered into different Classes of Service for restriction purposes. There are six Classes of Service
selected under "Extension" programming. There are also four tables of codes selected in “System” programming
which determine additional codes that are restricted or allowed.
1. Select “Extensions”
2. Select "Restriction classes".
3. Select “Day Class of Service” or “Night Class of Service”.
4. Select the class and enter the extensions.
Class 1 is no calls restricted.
Class 2 restricts codes added to Table 2 in Class codes programming.
Class 3 restricts codes in Tables 2 and 3 in Class codes programming.
Class 5 is associated with extensions when codes entered in the “Allowed Table” in Class codes programming are
to be allowed. This is combined with Classes 2 and 3.
Class 6 is the additional restriction codes in the “Restricted Table” in Class codes programming. These can be
combined with Classes 1, 2 and 3.
Individual Feature Phone programming
All Feature Phone users can program their own phone for the language on the phone, the ringing tone, the
contrast on the display etc.
Press the PROGRAM key on the phone.
The following screens are displayed:
1. 2.
– PHONE SETUP –
- Language
- Auto Answer
- Key Programming
– PHONE SETUP –
- Headset Mode
- Ringing Options
- Contrast Options
3. 4.
– PHONE SETUP –
- System Programming
- Background Music
- Speakerphone Options
– PHONE SETUP –
- INT EXT Order
- Exit
Feature Default
Notes
Language
• English
• French
• Spanish
English Se page
59.
Auto Answer
• Set Auto Answer
• Cancel Auto Answer
Auto Answer off See page
59.
Key Programming Lines 1-8 are programmed on the
eight key and Lines 1-16 are
programmed on the sixteen key
Feature Phone
See page
59.
Headset Mode
• Headset On
• Headset Off
Headset Mode Off See page
59.