Mitel 3000 Installation And Maintenance Manual

Mitel 3000
Installation & Maintenance Manual
30
Wall-mounting the Feature Phones
The phone pedestal is inverted on the base to wall mount the phone.
Locate, drill and plug the two screw locations as shown below. The holes should be deep enough to accept a one-
inch screw. Insert the two screws leaving sufficient space to clip the base over them. Locate the phone and base
over the screws.
6 inches
Line cord rails
Sixteen key Feature
Phone and DSS in Wall-
Mount position
Feature Phone in
Wall-Mount position

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English