Configuration
All licences are stored in a licence file, which you can obtain from your authorised dealer. Each licence
file can only be used for one communication server. To licence several communication servers, you will
obtain separate licence files to match the licence information of the individual communication server. If
a communication system consists of several communication servers (e.g. in a AIN), normally only one
licence file is required on the Master.
A new communication system must be activated first after commissioning. Otherwise, the communication
server changes after 4 operating hours to limited operating mode.
Upload the licence file in the Licences view.
If you have received a voucher (or with the help of the Equipment ID), you can also obtain the licence file
via Mitel MiAccess https://miaccess.mitel.com/ (partner login required). You can find instructions about this
in WebAdmin help.
See also:
Licences
5.8.2 File management
If we talk about file management we have to distinguish between the file management of the SMB
Controller and the file management of the MiVoice Office 400 application.
The file management of the SMB Controller is done via the SMB Controller Manager:
• Software - System software
In this view you see the currently installed system software and you can load and install a new system
software from a download server or from a local folder.
• Software - Applications
In this view you see the currently installed applications and you can load and install a new applications
from a download server or from a local folder.
The file management of the MiVoice Office 400 application is done via WebAdmin:
• Localization
You can adapt the communication system to your country's specifications, with the help of localization.
In this view language files can be manually or automatically loaded for Mitel 6800/6900 SIP phones
via FTP server. Moreover, you can manually or automatically load the languages for the WebAdmin,
Hospitality Manager and Self Service Portal user interface and online help, as well as an external
numbering plan for the SIP connection via the FTP server.
• File system state
In this view you can see the thematically structured file system's memory load. In an AIN the file
systems for all nodes can be viewed.
• File browser
With the file browser you have access to the communication server file system and create new folders
as well as view, import, replace or delete files in the file system.
Release 7.1
System Manual for Mitel SMB Controller 188
To Next Page
Loading...
Need help?
General
