Expansion Stages and System
Capacity
3
• Summary
• Basic system
• Expansion with cards and modules
• System capacity
• Power supply capacity
The basic system can be expanded using interface cards, system modules and licences. The expansion
possibilities available and the maximum system capacities need to be known so the communications system can
be ideally adapted to customer requirements. With the project data the optimum hardware configuration is easily
determined using the project planning application Mitel CPQ.
This is transition session.
3.1 Summary
The expansion possibilities of the basic systems Mitel SMB Controller at a glance.
The equipment is powered by an external power supply.
The mounting options are described in the Chapter Fitting the communication server.
Figure 4: Overview of the expansion possibilities
Note:
The interface cards TIC-1PRI, TIC-2AB and TIC-4AB and the wiring adapter WA-2W must not be used
in USA/Canada.
Release 7.1
System Manual for Mitel SMB Controller 39
To Next Page
Loading...
Need help?
General
