Configuration
Table 77: Default user account in emergency mode
User name admin
Password admin
Note:
The default password for emergency mode cannot be changed.
5.5.2 WebAdmin User accounts and authorization profiles
A user's authorizations are regulated by authorization profiles, which are assigned to the user accounts.
5.5.2.1 User accounts
Default user account for initial access
When a new communication server is opened or after a first start, the default user account (admin) and
several authorization profiles are created. The default user account is linked with the authorization profile
Administrator. This authorization profile is assigned the administration rights for the User access control for
Audio services and for WebAdmin at the Administrator authorisation level.
The required user accounts and authorization profiles can be set up using the default user account.
To access the default user account (Default User Account) enter the following:
Table 78: Standard user account and standard password
User name admin
Password After first start, you are asked to enter and confirm
a new password for the admin account.
Release 7.1
System Manual for Mitel SMB Controller 180
To Next Page
Loading...
Need help?
General
