Configuration
Note:
To prevent unauthorised access to the communication server, it is necessary to modify the default
password during first access. For password selection and input, see Password syntax.
Other predefined user accounts
Furthermore there are predefined user accounts for the Mitel Dialer for MiCollab, for OpenMobilityManager
(OMM), and for CloudLink gateway.
You can see the predefined user accounts in the User account view.
Note:
The predefined user accounts cannot be deleted.
Personal user accounts
Subject to the administration right for user access control, personal user accounts can be created in user
access control and assigned some authorisation profiles. The following rules apply to user names selection
and spelling:
• An user name must consist of a minimum of 1 and a maximum of 25 alphanumerical characters.
• Unlike the passwords, the user names are not case sensitive.
• The following special characters can be used: ?, /, lt;, >, -, +, *, #, =, full stop, comma and space.
• German umlauts (e.g. ä, ö, ü) and other diacritical characters (e.g. é, à, â) are not permitted.
• User names must be unique throughout the system.
• The user name and password must not be identical.
5.5.2.2 Authorization profiles
Predefined authorization profiles
The predefined authorization profiles are assigned administration rights and interface user rights. An
overview of all predefined authorisation profiles with their administration and access rights is available in
the WebAdmin help on the Authorization profile view.
Personal authorisation profiles
Subject to administration right for the administration right for user access control, no personal authorisation
profiles can be protected and assigned the desired rights. A description of the various administration and
access rights is available in the WebAdmin help on the Authorisation profile view.
Release 7.1
181 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
