Expansion Stages and System Capacity
• ATAS Interface / ATASpro Interface
These licenses are included in the MiVoice Office 400 SMBC Base kit - S bundle and allows to connect
external alarm and messaging sources via the Ethernet interface.
ATAS Interface: Many commands available for messaging (displaying text and presenting softkeys
on system phones), emergency number called alarm, safeguard basic with Redkey, charging bay
monitoring etc.
ATASpro Interface: Additional functions available like DECT localization, public emergency number
called alarm, evacuation alarm, enhanced safeguard with alarm trigger, get rooms and room state.
Note:
If you use the Mitel Open Interfaces Platform, OIP takes the licences from the communication
server. If you use the Mitel Open Interfaces Platform, OIP takes the licences from the
communication server.
• CSTA Sessions
This licence allows third-party applications to monitor/check a terminal on the communication server
using the CSTA protocol. If a terminal is monitored or checked by several applications or instances, one
licence is required for each monitoring/check.
• Presence Sync.via SIMPLE and MSRP
SIMPLE (Session Initiation Protocol for Instant Messaging and Presence Leveraging Extensions) is a
protocol for exchanging presence information, and is used between SIP endpoints (terminals, network
interfaces and nodes). MSRP (Message Session Relay Protocol) is a protocol used for exchanging data
between SIP clients (example for chats). These licenses are included in the MiVoice Office 400 SMBC
Base kit - S bundle.
3.4.6 Restricted operating mode
Without a valid Software Release licence the communication server switches over to a restricted operating
mode four hours after each restart. The restriction concerns the following aspects:
Restricted operating features:
• No call information for incoming calls and during the call connection.
• Dialling by name is deactivated.
• Functions cannot be invoked via the menu or function key (likewise no enquiry calls can be made).
• The team keys do not work.
• Functions codes are not carried out (except remote maintenance on/off).
• Dialling from PC and other CTI functions are not supported.
Restricted services and routing functions:
• Calls are not routed to integrated mobile/external phones.
• Call centre functions are out of service (no routing to ACD).
Release 7.1
75 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
