Expansion Stages and System Capacity
3.4 System capacity
System capacities are defined on the one hand by the existing hardware with its expansion possibilities
and on the other by the limits set in the software. The software limits can be partly expandable by licences.
3.4.1 General system capacity
The number of slots, interface cards and system modules per communication server have already been
mentioned in the previous chapters and are not listed separately in this chapter.
Table 22: General system capacity
Max. number... SMBC AIN with SMBC as Master
Nodes in a transparent network
(AIN)
– 11
Nodes with SIP networking 100 100
Users 200 200
Terminals per user
9
16 16
Simultaneous connections
• Without IP and without DECT
(internal / external)
35/38 250/250
• IP – not IP (internal / external) 30/30 250/250
• IP – IP (internal) 100 250
• IP – IP via SIP access channels
(external)
200 240
9
Only 1 operator console, 1 MiVoice 2380 IP, 1 Mitel SIP-DECT, 2 DECT-cordless phones and 1 MiCollab client (3 MiCollab clients
with MiCollab version 8.1) are possible for each user.
Release 7.1
System Manual for Mitel SMB Controller 56
To Next Page
Loading...
Need help?
General
