Operation and Maintenance
If the Network Management System is to know the potential events of the communication system, the
corresponding system components have to be defined in the form of configurable objects (Managed
Objects: MO). These objects and the related event messages are stored in an object library referred to as
the Management Information Base (MIB).
You will find the interface description and the different MIB versions on Mitel InfoChannel – Mitel Solution
Alliance - API and Interface Information - MiVoice Office 400 - MiVoice Office 400 Network Management.
To access these documents, you have to be a member in Mitel Solution Alliance (MSA). If you are not a
member yet, go to Mitel website and search for “Mitel Solution Alliance” where you can join. A membership
on level MSA partner (MP) is sufficient.
5 SNMP destinations can be defined. Forwarding to the SNMP destinations can be activated and
deactivated independently of the forwarding to the local and external signal destinations.
Note:
The SNMP destination is linked with the same event table as the local destination. Any changes to the
link and/or filter criteria for the linked event table also apply to the local destination.
6.5.1.3.4 Signal destination event log
Normally, the signal destination event log is assigned to Event table 4. The filter on this event table is
preconfigured for most event types in such a way that event messages are entered in the event log once
they arrive.
If the signal destination event log is assigned a different event table or if event table 4 is reconfigured,
the event messages are entered in the event log in accordance with the new event table or the new
configuration.
The last 254 event messages are recorded in the Event log. Active event messages and the last 10 Power
failures are recorded in separate logs.
If the maximum number of entries is exceeded, the oldest entry in each case is deleted.
If active event messages are available, they are indicated in WebAdmin on the left, with the symbol.
6.5.1.3.5 E-mail signal destination
With the e-mail client integrated in the communication server, event messages can be sent to internal or
external e-mail destinations. Normally, the signal destination E-mail destination is automatically assigned
to event table 5. Up to 5 e-mail destinations can be defined, and e-mail notification can be activated or
deactivated globally.
Release 7.1
257 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
