Expansion Stages and System Capacity
Note:
• The purchase of a new communication server also includes a software assurance for a specific
period. Log on with your partner login to Mitel MiAccess https://miaccess.mitel.com/ and obtain
a new licence file using the EID number and the voucher. The licence file issued as a result
contains the appropriate Software Release licence (and any other licences you may have
acquired). You can now activate the communication system with this licence file. Detailed
instructions about this can be found in the WebAdmin help on the Licences view.
• Mitel Advanced Intelligent Network
In an AIN, a valid Software Release licence must be available on the master only. Exception:
For long-term offline mode, for operation with Secure VoIP and use as backup communication
server, the satellite must also have a valid Software Release licence.
• Behaviour of satellites in offline mode:
Satellites with an incorrect release licence change over to restricted operating mode after
thirty-six hours. Satellites without any release licence change over to restricted operating
mode after four hours.
User
• Users
Mitel SMBC requires a User or an IP User licence for each user in the system.
Exception: A user without a terminal or with a virtual terminal only does not need a licence.
• User
A user with such a normal user license can have up to eight terminals of the type: Analogue, ISDN, DSI,
DECT, SIP-DECT.
• IP User (licence bundle)
With this licence bundle, an additional user is available who can assign 8 terminals of any type
(exception: for a Mitel One, an extra terminal license is required) including the appropriate phone
licences and video licences, if needed. This allows the user to change the phone type without changing
the licensing. The licence bundle is explicitly assigned to a certain user.
Release 7.1
System Manual for Mitel SMB Controller 70
To Next Page
Loading...
Need help?
General
