Connection Setup Route
햲
To obtain a pictorial view of the Connection setup route, select the
System Image
button
햳
Click
OK
to clear the display.
NOTE When using a standard RS232 Serial Port to communicate with the PLC, if another device is
already connected to the selected COM (n) interface, for example a serial mouse; Select
another free serial port.
햴
Select
OK
to close the
System image
display and return to the
Connection setup
dis
-
play. Than click the
OK
button to close the
Connection Setup
window. If you leave the
Connection Setup
window using the
Close
button, the settings are not saved.
Project Download Procedures Building a Project
4-40 MITSUBISHI ELECTRIC
To Next Page
Loading...
