Placing a user Function
햲
Click on the Function Block icon again, but this time select
Functions
and select the
Project Library
. Notice the newly created function “Centigrade” is now filtered down into
the operators list:
햳
Select CENTIGRADE and click ‘Apply’.
NOTE
Depending on preference, it is possible to minimise the
Function Block selection
window
following
Apply
by ticking the selection box as above.
The following will be displayed:
Functions and Function Blocks Functions
Training Manual GX IEC Developer 6 - 7
햳
Open up (Double Click) the body of Ladder POU “Process” in
the project POU pool.
To Next Page
Loading...
