Following compilation the following should be displayed:
If there are errors, click on the error detail and resolve the problem(s).
Monitoring the program
햲
Transfer the project to the PLC and monitor this network using the Monitor button on
the toolbar:
햳
Using the on screen variable forcing feature, input numbers into the ‘Deg_F’variable as fol
-
lows:
‘Double Click’ on the input variable and enter a value into the
Modify variable value
dia
-
logue as shown:
For reference, 100 deg F = 37 deg C (actual 37.7 deg C)
Functions and Function Blocks Functions
Training Manual GX IEC Developer 6 - 9
To Next Page
Loading...
