13A-12
3. Water Separator Element Replacement
Tightening Torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Special tools
[Removal]
• Loosen the plugs A and B, then loosen the drain plug to let out
the fuel in the water separator.
• Remove the cover using the .
WARNING
• Fuel is highly inflammable. Keep open flame and heat
source away from it.
• Spilled fuel can easily catch a fire. Wipe it off completely.
CAUTION
• Be careful not to damage the cover.
Mark Parts to be tightened Tightening torque Remarks
– Drain plug 1.47
± 0.3 {0.15 ± 0.03} –
– Cover 19.6
± 2.5 {2.0 ± 0.3} –
– Plug A 12.3
± 2.5 {1.25 ± 0.3} –
– Plug B 17.2
± 2.5 {1.75 ± 0.3} –
Mark Points of application Specified lubricant and/or sealant Quantity
– O-ring Engine oil As required
Mark Tool name and shape Part No. Application
Filter wrench MH063201 Removal and installation of cover
GENERAL INSPECTION AND ADJUSTMENT
To Next Page
Loading...
