13E-14
2.3 Fuel injection quantity control
(1) Fuel injection quantity during engine startup
• During engine startup, the fuel injection quantity is determined in
accordance with the engine speed and coolant temperature.
(2) Basic fuel injection quantity
• The basic fuel injection quantity is determined in accordance
with the engine speed and throttle opening.
(3) Maximum injection quantity
• The maximum injection quantity is calculated from the engine
speed and boost pressure.
(4) Fuel injection rate adjustment resistor correction amount
• To limit inconsistency in the injection quantity, the injection quan-
tity is corrected by the fuel injection rate adjustment resistor.
STRUCTURE AND OPERATION
To Next Page
Loading...
