6-19
• Maintenance alarm indication
• For each item for which you have set the
replacement interval, an alarm is indicated at
621.5 miles (1,000 km) or 1 month before the
set distance or period of time is reached.
If this condition is met for an item, an alarm will
be indicated for the item every time the starter
switch is turned to “ON”. The alarm indication
goes out as soon as the parking brake is
released. If there are multiple alarms to indicate,
they are indicated one after another, each being
indicated for 3 seconds.
• If a periodic replacement item is used continu-
ously even after the set distance or period is
reached, the maintenance information symbol
will turn to amber .
• Resetting of maintenance information
After replacing a periodic replacement item such as
the oil, filter element, or engine coolant, reset the
maintenance information for the item as follows:
1. Press the MODE switch to select the mainte-
nance information mode.
2. Press the SELECT switch to select the item
for which the maintenance information is to be
reset.
3. Give a long press (1 second or more) on the
SET/RES switch to reset the maintenance
information.
NOTE:
Do the same procedure after replacing any periodic
replacement item.
Z21559
Z21560
Z21561
FE_FG.book Page 19 Monday, December 19, 2011 4:22 PM
To Next Page
Loading...
