Table 1-3
LED name
Emission color
Status
CONT. Green The controller is operating properly.
REMOTE Green Connection to the PC is okay.
SENSER Green The detector is connected properly.
EMER. Red Lights up when the Emergency SW is turned on.
MOTOR Yellow Lights up when an error occurs in servo related unit.
MOTION Yellow Lights up when an motion error occurs.
1.3.4.2 Controller Left side panel
Fig. 1-9
The LED that indicates the condition of the system can be seen through the error code indication opening
(translucent panel) located on the left side of the controller. This LED indicates various error conditions.
For details, refer to “CHAPTER 5. TROUBLESHOOTING”.
Error code display window
No. 99MBB187A
1-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
