7. Main power switch
Main power switch of the controller.
8. Detector connector and option connectors
Connectors for connecting the roughness measuring detector and various
optional boards are set here.
9. Grounding terminal
CAUTION
• Before performing wiring operation be sure to turn off the main power switch on the
controller rear panel in addition to the power switch on the front panel.
• Do not disassemble and modify the controller. It is possible that the measuring accuracy
and functions will be affected adversely. Also, an unexpected accident may result. For
inspection and repair inside the controller, contact your dealer or Mitutoyo sales office.
WARNING
•If an anomaly such as heat generation, smoke, or foreign odor occurs with the
controller, immediately turn off the power and remove the power plug of the AC adapter
from the outlet. Make repair requests to your dealer or Mitutoyo sales office. If use is
continued under such an abnormal state, an electric shock or a fire can result.
No. 99MBB187A
1-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
