Mitutoyo SURFTEST SV-3100 - Page 75

Stylus name Order No.
Tip
radius
ID
color
Tip
angle B
12AAB339 2µm Black 60°
12AAB410 5µm None
Gear tooth surface stylus
12AAB422 10µm Yellow
90°
*12AAC739 2µm Black 60°
*12AAB412 5µm None
Eccentric stylus
*12AAB424 10µm Yellow
90°
*12AAC740 2µm Black 60°
Color
(ID color)
Detail A
Color
(ID color)
Detail A
*12AAB413 5µm None
Deep-hole double length stylus
*12AAB425 10µm Yellow
90°
*12AAC741 2µm Black 60°
*12AAB414 5µm None
Deep-hole triple length stylus
《Measurement condition》
Measurement speed: 0.2mm/s or less
Sumpling pitch: 0.5µm or more
λs : 2.5µm or more
*12AAB426 10µm Yellow
90°
Color
(ID color)
Detail A
Color
(ID color)
Detail A
@1: Standard accessory of No.178-396-2 detector (measuring force 0.75mN type)
@2: Standard accessory of No.178-397-2 detector (measuring force 4mN type)
If a stylus marked with an asterisk (*) is used, the measuring force of the detector is not guaranteed.
No. 99MBB187A
6-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com