188 | Section 4 Appliances ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ----------------- Monarch SE 2004
Glass Cleaning:
The glass is cleaned in the factory during the assembly operation. During ship-
ment, installation, handling, etc., the glass surface may collect dust
particles; these can be removed by buffing lightly with a clean dry cloth.
To remove finger prints or other marks, the glass can be cleaned with a damp
cloth using a good quality household glass cleaner. The glass should be completely
dried with a lint free cloth or paper towel. Wait until it is time to change the light
bulbs to clean inside glass surface.
CAUTION: Do not use abrasive cleaner on glass surface or spray
liquids directly onto any surface.
To Next Page
Loading...