Preparing Your Radio for Use
English
4
Attaching the Antenna
With the radio turned off, set the antenna
in its receptacle and turn clockwise to
attach it to the radio.
To remove the antenna, turn the antenna
counterclockwise. Make sure you turn off
the radio first.
For information regarding available
antennas, see Antenna on page 88.
Attaching the Belt Clip
Align the grooves of the belt
clip with those of the battery
and press downward until
you hear a click.
To remove the clip, use a flat-bladed
object to press the belt clip tab away
from the battery. Then, slide the clip
upward and away from the radio.
:65 #
To Next Page
Loading...
