General Radio Operation
English
28
OR
Follow the procedure below.
1 < or > to Phon.
2 Press the Menu Select button directly below Phon. The
display shows the last transmitted phone number.
3 Press Lnum to go to the last number dialed.
OR
U or D to the required phone number.
OR
Use the keypad to enter the required phone number.
4 Press and release the PTT button to dial the phone number.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 When your call is answered, press the PTT button to talk.
Release the PTT button to listen.
7 Press H to hang up and return to the home display.
See Phone Call Display and Alert Prompts on page 22 for
more information if your call is NOT answered.
Repeater or Direct Operation
The REPEATER operation increases the radio’s range by
connecting with other radios through a repeater. The transmit
and receive frequencies are different.
The DIRECT or “talkaround operation” allows you to bypass the
repeater and connect directly to another radio. The transmit and
receive frequencies are the same.
Procedure:
Press the preprogrammed Repeater/Direct switch to toggle
between talkaround and repeater modes.
OR
Follow the procedure below.
1 < or > to Dir.
2 Press the Menu Select button directly below Dir. The
display momentarily shows the current radio setting.
3 You see Repeater mode if the radio is currently in
Repeater mode.
OR
You see Direct mode and the Talkaround icon if the radio is
currently in Direct mode.
6875945M01-A_Full.book Page 28 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
