Identifying Status Indicators
English
19
Alert Tones
An alert tone is a sound or group of sounds. Your radio uses alert tones to inform you of your radio’s conditions. The following table
lists these tones and when they occur.
You Hear Tone Name Heard
Short,
Low-Pitched Tone
Radio Self-Test Fail When radio fails its power-up self test.
Radio Self-Test Fail When radio fails its power-up self test.
Reject When unauthorized request is made.
Time-Out Timer Warning Four seconds before time out.
Long,
Low-Pitched Tone
No ACK Received When radio fails to receive an acknowledgment.
Time-Out Timer
Timed Out
After time out.
Talk Prohibit/PTT Inhibit (When PTT button is pressed) transmissions are not allowed.
Out-of-Range (When PTT button is pressed) the radio is out of range of the system.
Invalid Mode When radio is on an unpreprogrammed channel.
Individual Call
Warning Tone
When radio is in an individual call for greater than 6 seconds without any activity.
A Group of
Low-Pitched
Tones
Busy When system is busy.
6875945M01-A_Full.book Page 19 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
