Advanced Features
English
37
8 If there is no voice activity for a programmed period of time,
the call ends.
OR
The call ends when it reaches the maximum ring time.
Adding a New Contact Entry
Procedure:
1 < or > to Cnts.
2 Press the Menu Select button directly below Cnts. The
entries are alphabetically sorted.
3 U or D to New Contact and press the Menu Select
button directly below Sel.
4 U or D to New Name and press the Menu Select button
directly below Edit.
5 You see Please enter a name and a blinking cursor
appears.
Use the keypad to enter the name.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press Menu Select button directly below Del to delete any
unwanted characters.
Press and hold
0 to toggle between normal text entry
mode, uppercase mode and num lock mode.
6 Press the Menu Select button directly below Done once you
have entered the name.
7 Repeat Steps 4 through 6 to enter the ID and call type.
8 Press the Menu Select button directly below Done once you
have finished entering the information.
9 You see <Entry> Stored, confirming that the contact entry
has been added.
Deleting a Contact Entry
Procedure:
1 < or > to Cnts.
2 Press the Menu Select button directly below Cnts. The
entries are alphabetically sorted.
3 U or D to the entry you want to delete and press the Menu
Select button directly below Optn.
4 U or D to Delete and press the Menu Select button
directly below Sel.
5 You see Deleting <Entry> Confirmed? on the display.
6 Select Yes to delete the entry.
You see <Entry> deleted and the radio returns to the
main screen for Contacts.
OR
Select No to return to the main screen for Contacts.
6875945M01-A_Full.book Page 37 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
