Identifying Radio Controls
English
8
Programmable Features
Any references in this manual to controls that are
“preprogrammed” mean that a qualified radio technician must
use the radio’s programming software to assign a feature to a
control.
Your dealer can program the programmable buttons or keypad
as shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the preprogrammed
duration (between 0.25 seconds and 3.75 seconds).
• Hold down – Keeping the button pressed.
Assignable Radio Functions
Call Alert – Allows the radio to function like a pager, or to verify
if a radio is active on the system.
Call Response – Allows you to answer a private call.
Channel – Selects a channel.
Dynamic Priority – Allows any channel in a scan list (except for
the priority-one channel) to temporarily replace the priority-two
channel.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Monitor – Monitors a selected channel for all radio traffic until
function is disabled.
Nuisance Delete – Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list. The designated transmit channel refers to the
user’s selected zone/channel combination from which scan is
initiated.
Phone – Allows you to make and receive calls similar to
standard phone calls.
PL Defeat – Overrides any coded squelch (DPL or PL) that is
preprogrammed to a channel.
Private Call – Allows a call from an individual radio to another
individual radio.
Repeater/Direct – Toggles between using a repeater and
communicating directly with another radio.
Reprogram Request – Notifies the dispatcher that you want a
new dynamic regrouping assignment.
Scan List Programming – Selects the scan list for editing.
Scan On/Off – Toggles scan on or off.
6875945M01-A_Full.book Page 8 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
