Advanced Features
English
41
Editing the Scan List
This feature lets you change scan list members and priorities.
Note: The maximum number of members for a trunking
priority monitor scan list is 15; for a conventional scan
list, 15; and for a talkgroup scan list, 10.
Procedure:
Use the preprogrammed Select (Top Side) button.
1 < or > to Prog.
2 Press the Menu Select button directly below Prog. The
display shows the lists that can be changed.
3 U or D to Scan.
4 Press the Menu Select button directly below Scan.
5 The display shows the programming mode icon and the first
list member.
6 U or D to the number you want to edit.
7 Press the Select button once to add the currently displayed
channel to the scan list.
8 U or D to select more list members whose scan status
you want to change.
OR
Use the keypad to go directly to that scan list member.
OR
Use the 16-Position Select knob to select another scan list
member.
9 Press H to exit scan list programming and return to the
home display.
OR
Move the preprogrammed Scan List Programming switch to
programming position and proceed to Step 5 of the procedure
below.
OR
Follow the procedure below.
1 < or > to Prog.
2 Press the Menu Select button directly below Prog. The
display shows the lists that can be changed.
3 U or D to Scan.
4 Press the Menu Select button directly below Scan.
5 The display shows the programming mode icon and the first
list member.
6 U or D to the number you want to edit.
7 Press the Menu Select button directly below Sel to add and/
or change the priority of the currently displayed channel in
the scan list.
OR
Press the Menu Select button directly below Del to delete
6875945M01-A_Full.book Page 41 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
