General Radio Operation
English
26
Procedure:
Use the preprogrammed Call Response button to answer a
Telephone Call:
1 You hear a telephone-type ringing and the LED blinks
green. The display shows Phone Call and the call received
icon blinks.
2 Press the Call Response button within 20 seconds after the
call indicators begin.
3 Press and hold the PTT button to talk. Release the PTT
button to listen.
4 Press H or the Call Response button to hang up and
return to the home display.
See Making a Telephone Call (Trunking Only) on page 27 for
details on making a Telephone Call.
Making a Radio Call
You can select a channel, subscriber ID, or group by using:
• The Channel Selector Knob
• A preprogrammed One Touch Call button
• The Contacts list (see Viewing a Details of a Contact on
page 39)
Making a Talkgroup Call
To make a call to a group of users, your radio must be
configured as part of that group.
Procedure:
1 Turn the Channel Selector Knob to select the channel with
the active group alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3 Press the PTT button to make the call. The LED lights up
solid red. The display shows the group alias or ID, and the
Group Call icon.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.When the target radio
responds, the LED blinks green. You see the Group Call
6875945M01-A_Full.book Page 26 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
