General Radio Operation
English
25
5 Release the PTT button to listen.
6 If there is no voice activity for a predetermined period of
time, the call ends.
See Making a Talkgroup Call on page 26 for details on making
a Talkgroup Call.
Receiving and Responding to a Private Call
(Trunking Only)
A Private Call is a call from an individual radio to another
individual radio.
These one-to-one calls between two radios are not heard by
others in the current talkgroup. The calling radio automatically
verifies that the receiving radio is active on the system and can
display the caller’s ID.
Note: The radio automatically exits the feature, if the time-out
timer is enabled, when the radio is left idle and time is
up. You will hear the Menu Inactive Exit Tone upon
feature exit.
Procedure:
Use the preprogrammed Call Response button to answer a
Private Call:
1 You hear two alert tones and the LED blinks green. The
display shows Call Receivd and the call received icon
blinks.
2 Press the Call Response button within 20 seconds after the
call indicators begin.
3 During the call, the display shows the caller’s name, if it is in
the call list.
OR
During the call, the display shows the caller’s ID number, if
the caller’s name is not in the call list.
4 Press and hold the PTT button to talk. Release the PTT
button to listen.
5 Press H or the Call Response button to hang up and
return to the home display.
See Making a Private Call (Trunking Only) on page 27 for
details on making a Private Call.
Receiving and Responding to a Telephone Call
(Trunking Only)
This feature allows you to receive calls similar to standard
phone calls from a landline phone.
Note: The radio automatically exits the feature, if the time-out
timer is enabled, when the radio is left idle and time is
up. You will hear the Menu Inactive Exit Tone upon
feature exit.
6875945M01-A_Full.book Page 25 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
