Identifying Status Indicators
English
22
Phone Call Display and Alert Prompts
The following appears on the radio’s display when you make and receive Phone calls. The radio also uses alert tones to indicate the
current status.
You Hear You See When Notes
A Long
Tone
No Phone
You press the PTT button and the
phone system is not available.
Press
H to hang up. The radio returns to the home display.
Phone Busy The phone system is busy. Press
H to exit the phone mode and try your call later.
A Busy
Tone
Phone Busy When a channel is not available. The radio automatically connects when a channel opens.
–
No
Acknowldg
The call is not acknowledged. Press
H to hang up. The radio returns to the home display.
A High-
Pitched
Tone
– When you release the PTT button.
The radio indicates to the landline party that he or she may begin
talking.
Note: You have the option of sending additional digits (overdial), such as an extension number, or credit card or PIN numbers, to the
phone system. If the radio is programmed for live overdial, every digit entered after the call is connected is sent to the phone
system.
If the radio is programmed for buffered overdial, the digits pressed are entered into memory and then sent when the PTT
button is pressed. Press the PTT button to send either digits or voice, but not both at the same time.
6875945M01-A_Full.book Page 22 Tuesday, July 8, 2008 12:54 AM
To Next Page
Loading...
Need help?
General
