68P80801E30-A 5/1/2002 6-13
Gen 3 Site Controller System Manual Chapter 6 System Testing
Loading the Base Radios
3. Verify that the BR receiving the download is in the proper cabinet
and position.
A failure in downloading to the proper BR cabinet and position
indicates that the BR has been mis-programmed. Otherwise, a failed
download might indicate that the cabinet is installed improperly.
Continue downloading the remaining BRs, and then contact your iDEN
System Manager for additional help.
4. Apply power to the next BR.
5. Repeat this procedure for each additional BR.
To Next Page
Loading...
