8
Global Telecom Solutions Sector
68P80801E30-A 5/1/2002 1301 E. Algonquin Road, Schaumburg, IL 60196 8-1
Chapter 8
Software
Commands
Chapter Overview
This chapter provides definitions for the Man-Machine Interface (MMI)
commands. MMI commands are used to test and configure the system
equipment via a service computer.
The following table lists this chapter’s topics.
MMI Commands 8-2 describes the MMI commands, including access
levels, and conventions
Site Controller
Commands
8-4 defines the site controller command set which is
used to configure and test the site controller
To Next Page
Loading...
