Motorola iDEN Site Controller - Site Controller Commands

Chapter 8 Software Commands Gen 3 Site Controller System Manual
Site Controller Commands
8-4 68P80801E30-A 5/1/2002
Site Controller
Commands
HELP
Syntax:
help
The 'help' command prints a list of commands and their functions.
Example:
iSC> help
help
ver
quit
display eas
display gps alarms
ping gps
status gps
display temp
ping standby
switch isc
whois isc
display nic
loop <line#>
deloop <line#>
ping br
customer output <activate | deactivate>
monitor <off | gps | external | 5mhz>
selftest
iSC>