116
Scroll to the desired style and press Set. You will hear the
new ring style immediately for a few seconds. If necessary,
adjust the volume level.
Setting the Volume
This sub-menu allows you to adjust the
simplex, duplex, earpiece, speaker, and
keypad tone volume.
To set the volume:
1. From the main menu, select Setup >
Set Volume.
2. Scroll through the list.
3. Choose the required item, and press Change.
4. Adjust the level with the left arrow to decrease and the right
to increase the volume. A feedback tone is heard, and a
volume level bar is displayed.
5. Press Back to exit.
Setting the Display’s Working Language
From the main menu, select Setup >
Language.
The display shows the current language
used. You can customize your MTH800 to
operate in English, German, French,
Spanish, Dutch, or in a language defined by
your Service Provider. The default setting from factory is
English.
Scroll to the desired language and press Select. The display
shows the selected language for a few seconds.
If the display shows only one option Volume, user can adjust all
of the above settings at once. User has the option to change
the settings individually when the Volume Adj. Mode is set to
Individual. More information please go to “Setting Volume
Adjustment Mode” on page 118.
Volume
Duplex Vol: 0_
Simplex Vol: 1_
Earpiece Vol: 1_
Speaker Vol: 0_
Keypad Vol: 0_
Change Done
Language
English
Deutsch
Français
Español
Nederlands
Select Back
Language
To Next Page
Loading...
