About This Guide xiii
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started, provides information on getting the vehicle computer up and running for the first
time.
•
Chapter 2, Installation, provides instructions for installing the vehicle computer in a forklift, on a wall or on a
desktop. Provides instructions for installing accessories.
•
Chapter 3, Operating the VC70, explains how to use the vehicle computer. This includes instructions for
powering on and resetting the vehicle computer, entering and capturing data.
•
Chapter 4, DataWedge Scanner Connection, describes how to install the scanners and accessories for the
VC70 vehicle computer.
•
Chapter 5, TelnetCE Configuration, provides instructions required for connecting serial scanners in a
Wavelink TelnetCE session via the VC70 vehicle computer
•
Chapter 6, Wireless LAN Applications, provides instructions for using and configuring the mobile computer
on a wireless network.
•
Chapter 7, Using Bluetooth, explains how to use Bluetooth functionality on the vehicle computer.
•
Chapter 8, Sync with Host Computer, provides instructions for installing and configuring ActiveSync.
•
Chapter 9, Application Development and Deployment, provides instructions for installing the EMDK for C on
the host computer and downloading software files to the vehicle computer.
•
Chapter 10, Staging and Provisioning, provides instructions for staging and provisioning the vehicle
computer.
•
Chapter 11, Software Configuration, includes special configuration instruction for third party software used
with the vehicle computer.
To Next Page
Loading...
Need help?
General
