Operating the VC70 3 - 19
Resetting the Vehicle Computer
There are two reset functions, warm boot and cold boot.
Performing a Warm Boot
A warm boot restarts the vehicle computer and saves all stored records and entries. In the Windows CE
environment.
To perform a warm boot:
•
Press the Power button on the Quick Access Panel continuously for 5 seconds
or
•
Tap > Programs > Warm Boot.
Performing a Cold Boot
A cold boot restarts the vehicle computer clears both program memory and storage memory.
To perform a cold boot when external power is connected, simultaneously press the
P1, P3 and the Power button
on the Quick Access Panel.
A cold boot also restarts the vehicle computer, but erases all stored records and entries in RAM. Data saved in
flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the
factory default settings.
NOTE Files that remain open during a warm boot may not be retained.
NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation.
To Next Page
Loading...
Need help?
General
