Chapter 8 Sync with Host Computer
Introduction
To communicate with a host computer, the host computer requires a synchronization program. After synchronizing
the VC70 with a host computer, changes made on the VC70 or host computer appear in both places.
To communicate with a host computer running Windows XP, install Microsoft ActiveSync (version 4.5 or higher).
To communicate with a host computer running Windows 7, install Windows Mobile Device Center (WMDC version
6.1 or higher).
Using a synchronization software:
•
Allows working with VC70-compatible host applications on the host computer. The synchronization software
replicates data from the VC70 so the host application can view, enter, and modify data on the VC70.
•
Synchronizes files between the VC70 and host computer, converting the files to the correct format.
•
Backs up the data stored on the VC70. Synchronization is a one-step procedure that ensures the data is
always safe and up-to-date.
•
Copies (rather than synchronizes) files between the VC70 and host computer.
•
Controls when synchronization occurs by selecting a synchronization mode, e.g., set to synchronize
continually while the VC70 is connected to the host computer, or set to only synchronize on command.
•
Selects the types of information to synchronize and controls how much data is synchronized.
To Next Page
Loading...
Need help?
General
