Using Bluetooth 7 - 5
T
4. The application scans for bluetooth devices automatically. A list of discovered bluetooth devices is shown on
the screen.
5. To refresh your list, click the refresh button on the lower left side of the screen.
Bonding with Discovered Device(s)
A bond is a relationship created between the vehicle computer and another Bluetooth device to exchange
information in a secure manner. Creating a bond involves entering the same PIN on the two devices to bond. Once
a bond is created, and the Bluetooth radios are turned on, the devices recognize the bond and are able to
exchange information without re-entering a PIN.
To bond with a discovered Bluetooth device:
1. Discover remote devices. See Discovering Bluetooth Device(s) on page 7-4.
2. Select the required device from the list and click the > button.
NOTE You can bond (pair) a scanner to your vehicle computer by scanning the pair barcode in the upper right
side of the VC70.The scanner beeps indicating that it is successfully connected to the VC70
.
To Next Page
Loading...
Need help?
General
