NPort Server User’s Manual
6-2
Changing Between Types
1. Insert the NPort Server Disk or CD to the drive.
2. Go to Start à Run.
3. Enter drive name then follow with ":\setup". Click Next to continue.
4. Select 'Multi-Host' or ‘ Custom’ and continue with installation.
5. Follow the instruction on the screen to finish. You may skip the procedure for
adding servers.
6. Check with NPort Manager. You should see the servers configured by previous
installation procedure with program caption as your new installation type.
Modify the options as you need.
To Next Page
Loading...
Need help?
General
