NPort Server User’s Manual
5-12
Modifying Mapping COM Names
If you like to choose other COM names different from what you have assigned
under Add Server Wizard, you may follow the steps below to accomplish it.
Change COM names of all ports on the server consecutively
1. Go to the server you like to modify
COM names.
2. Go to first port.
3. Go to toolbar and select Map Port.
4. Select the COM name of the port you
like to map to.
5. Check on the box for mapping COM
names consecutively.
6. Click OK to finish.
Change COM name of one port
1. Go to the server you like to modify
COM names.
2. Go to port you like to make change.
3. Go to toolbar and select Map Port.
4. Select the COM name of the port you
like to map to.
5. Check off the box for mapping COM
names.
6. Click OK to finish.
To Next Page
Loading...
Need help?
General
