NPort Server User’s Manual
3-12
Unmapping Ports
If you do not need to use the port any
more, you may unmap the port to free
the resource from your Windows NT.
Follow the steps below:
1. Go to the server you like to
modify.
2. Go to port.
3. Go to toolbar and select Unmap Port.
. Note: Screen above shows you the display after you unmap port5 and port6.
Configuring Server General Information
You may modify the server name while running server properties. Server name is
easier for you to manage the whole system.
1. Go to the Server.
2. Click on Server Properties from toolbar.
3. Modify the server name.
4. Save Configuration as needed.
To Next Page
Loading...
