Setting Up Custom 5-25
Modifying Routes
1. Run NPort Manager.
2. Select the server you want to modify routes.
3. Select Server Properties from the Toolbar or double clicks on the server.
4. Select Advanced Page
5. Select the route setting you like to modify.
6. Click on Modify button.
7. Click OK to exit Gateway Settings.
8. Save Configuration as needed.
Removing Routes
1. Run NPort Manager.
2. Select the server you want to remove routes.
3. Select Server Properties from the Toolbar or double clicks on the server.
4. Select Advanced Page
5. Select the route setting you like to remove.
6. Click on Remove button.
7. Click OK to exit Gateway Settings.
8. Save Configuration as needed.
To Next Page
Loading...
